|
Post by pawatson on Oct 8, 2016 10:54:19 GMT -6
Require 1/2" minimum diameter rubber o-ring fronts like the TSRA has on the LMP class...this would go along w/ the TSRA LMP Rules. The 5/8" front rule in the Scale Series isn't in effect anyway since JK started using a smaller O-ring on their 5/8" fronts awhile back. I'm planning on eliminating the non-wing classes from the TSRA for 2017 & make it a 5 class Saturday Only format. Adding Burleson would be a great addition to the Scale Series as it's a 3hr25min drive from Houston & probably about the same from San Antonio & even shorter from Austin. They had better than a full track at last weekends TSRA Race there which is better than any other track in Texas.
|
|